Electronic Components

Ixys Thyristor Module

IR MODULE B40DL100S05

Infineon Bridge Rectifier

Infineon Bridge Rectifier achieves full-wave rectification by combining four diodes in bridge type arrangement. It is manufactured using a substrate of Al2O3 which has low thermal resistance. It has an advanced reverse polarity protection and is utilized in energy saving lamp, mobile battery charger, and digital cameras. The rectifier has solder pins attached to it for mounting PCB. The forward voltage drop is very less and switching speed is also low which enables it to approach the zero time.

Electronic Diode 1N4056

PRX Igbt Module KD421K15

IGBT MODULE IC GS-D200S

PRX IGBT Module

PRX IGBT Module is a three-terminal electronic component and utilized as a switching transistor for controlling the gate terminal voltage. It works under very high frequency and can retain its high switching speed for a long time. It has a huge bipolar current-carrying capability and combines the benefits of both BJT and MOSFET devices in the form of monolithic. It finds applications in power electronics, PWM (Pulse Width Modulated), SMPS (Switched-Mode Power Supplies).

IR Thyristor 100MLS250

Igbt Semiconductor MFA57-16

SCR diode

Mitsubishi Electric Semiconductor

EVM31-050 IGBTs

IGBT Diode Module

Thyristor Power Controller

Thyristor Power Controller is used to control power/voltage supplied to some device. It typically finds application in industrial furnace construction or in plastic processing. The controller integrates with processes or machines automation network or can also operate independently. It precisely calculates and monitors the load resistance in the circuit to greatly improve the system performance. The current rating varies from 16 A to 4200 A and the rated voltage lies between 110 and 690 V.

ABB IGBT Modules

ABB IGBT Modules provide outstanding performance, efficiency, and longevity which are utilized in numerous applications including general purpose drives, servo-units, solar inverters, and wind applications. These modules have very low switching losses and high power density. The base plate is made up of copper and is isolated from rest of the module which results in a low power loss. An integrated NTC temperature sensor is attached to the transistor to measure the thermal stability.

sanrex igbt QBB150A060

IGBT Power Modules

SEMIKRON Semi-Conductor SKKT500-16E

ETN31-055 IC DIODE

Darlington(GTR) Module EVL31-050

FUJI Semi Conductors EVL31-050

transistor IGBT modules

GTR Power Module

Switching IGBT Modules

RF Power Module QM75TX-H

RF Power Module QM75TX-H is made by using different parts such as discrete devices, bare die, and MMIC based parts. It is used in different systems including radar, electronic warfare, communication, and test & measurements applications. It is highly durable and can operate in most tough environments. It uses low voltages, higher currents, and low load resistances. The module is available in various sizes, shapes, designs and other specifications as per the requirements.

IPM Modules

IPM Modules 7MBI100N-060 is renowned for its low loss, soft switching, and high reliability. It has an externally accessible thermistor embedded in it. The module is suitable for measuring substrate temperature. The standard input power supply is 1200V and is controlled by a single controller which is the internal bootstrap circuit and the output voltage is 100V. It is widely used as an inverter for motor drive and in AC & DC servo drive amplifier.

Powerex power transistor module KSB13060

MITSUBISHI elevator module PM150DSA120

fz400r12ks4 IGBT diode SCR thyristor transistor

IPM Modules BSM150GB60DLC

Thyristor Modules MG75Q1BS11

Transistor Igbt Modules VUO62-12NO7

Power Igbt Transistor 6mbi75fa-060

power IPM module

Drive Module QCA75A060

Thyristor Diode

Thyristor Diode has four layers of alternating p-type and n-type materials. It can control a large amount of power and voltage and is used in light dimmers and electric motor speed control. The diode can be either off or on; it can never be in a position in between. It is found in three states, they are reverse blocking mode, forward blocking mode, and forward conducting mode. It does not require a continuous supply of gate current to remain in the on state.

IC Transistor QM10HB-2H

PRX Darlington Transistor

SCR GTR Module

SCR GTR Module is a kind of diode which is mainly used to convert alternating current to direct current. It is utilized in LED headlight bulbs, or 35w HID ballasts that prevent bulb out warnings or flickering. It can control reverse lights and other signal lights around the vehicle. The module can be operated manually or automatically. There are various testing methods available which test whether the module is working properly or not.

Diode Module 7MBR25LC120

EUPEC IGBT Module BSM25GD120DN2 IGBT

Power Module 2MBI150L-060

Power Module 2MBI150L-060 allows full control over its turn on and turn off operations. It has vertically oriented layers of n-type and p-type semiconductor materials and the doping density in the emitter region is considerably greater than that in the base region. The emitter and base region are interleaved to prevent current crowding and second breakdown. The saturation region of this module is sub-divided into a quasi-saturation region and a hard saturation region.

IGBT Gate Drivers Module

IGBT Gate Drivers Module gives high performance and at the same time is reliable which enables a high power system design. There are integrated under-voltage and over-voltage systems which prevent the IGBTs from working outside of the optimal gate voltage range. The high side and low side drivers are not overlapped while operation. It is heavily utilized in inverters, drives & automation, UPS (Uninterruptable Power Supply), transportation, and medical.

Semiconductor Diodes MCC250-12IO1