Cookie Img
Call Us
Home » Products » Bridge Rectifiers

Bridge Rectifiers

Bridge rectifier renders rectification of full wave through an AC input of two-wire which results reduction of weight and cost. This is almost double the output which is provided by other rectifiers. The most important feature of this is that whatever be the input polarity, output polarity will always be same. Simple filtering is needed in this case because of higher level of frequency and lower ripple voltage. A transformer of small size can be used or the utilization of transformer can be avoided.


Various benefits of bridge rectifier are cited below:

 

  • The efficiency of rectification is twice the rectification offered by half wave rectifier.
  • Renders higher transformer usage, output power and output voltage
  • The current flows for the whole AC cycle
  • Usage of transformer can be eliminated if voltage stepping down and up is not required.
Diode Bridge Rectifier
close
Diode Bridge Rectifier
DSAI17-16A
Diode Bridge Rectifier is designed as an arrangement of at least 4 diodes with capacitors that are required for converting alternating current into direct current of desired voltage. It provides same polarity of output for any voltage input. This rectifier is known to provide full wave rectification with high efficiency. It can be availed as single or three phase rectifiers as required according to the need & requirement of the system.
Bridge Rectifier Modules
close
Bridge Rectifier Modules
SKT600/18E
Bridge Rectifier Modules are the full wave rectifiers required for efficiently converting alternating current into direct current using four or more diodes. They are known to have low ripples in the output DC signals, high efficiency, and low power loss. These modules are comprised of transformer, resistor, diode, AC voltage source, and ground. They can also supply polarized voltage for the welding processes. These are utilized in almost all electronic equipments assuring proper voltage supply for their efficient working.
Three Phase Bridge Rectifier
close
Three Phase Bridge Rectifier
ETK85-060
Three Phase Bridge Rectifier is specifically designed for converting three phase AC current into the desired voltage output DC power source. It uses six diodes with the corresponding circuit for its efficient working. This rectifier is completely suitable for the applications which require very high voltage or current including metal smelters. It has direct heatsink mounting, low junction to case thermal resistance, and complete compliance with RoHS.
FUJI Electric Rectifiers
close
FUJI Electric Rectifiers
ETK81-060B
Fuji Electric Rectifiers are highly appreciated for their high voltage power bearing capacity and ability to provide protection against overheating and overcurrent situations. They are the type of electrical device which is utilized for converting alternating current into direct current in a single direction flow. These rectifiers are also used for detecting amplitude modulated radio signals and also supply polarized voltage for welding purpose.
FUJI PIM Module
close
FUJI PIM Module
ETL81-050
Fuji PIM Module is designed as an integration of three phase inverter, diode bridge, and braking circuits into a single unit. It is highly appreciated for having compact structure with lightweight nature. This module works by converting alternating power received from mains into direct current voltage with the help of rectifier. Capacitor installed in the module smoothen the pulsating output voltage helps in adjusting the speed & torque of electric motors.
Semikron Rectifiers SKT2408C
close
Semikron Rectifiers SKT2408C
SKT2408C
Semikron Rectifiers SKT2408C are primarily designed for converting AC power into DC source of desired voltage. They allow only single direction flow of electrons with a special process known as rectification. These are generally installed in combination with transformers, voltage regulators, and smoothing filters. They can also be used in gas heating systems for detecting the presence of a flame. These rectifiers can also be utilized as a source of power for various applications.
FUJI Rectifier Modules
close
FUJI Rectifier Modules
ETK85-060
FUJI Rectifier Modules structures are based on the latest power monitoring technology assuring their excellent performance with high efficiency. They are known to have low total harmonic distortion, adjustable voltage & current, with power density. These modules are required for rectification which straightens the direction of current and converts AC to DC of required voltage. They can be availed as single or three phase rectifier modules in configuration of half & full wave rectification.
FS225R12KE3 / AGDR-71C
close
FS225R12KE3 / AGDR-71C
FS225R12KE3/AGDR-71C


SHI TONG HONG DA (HK) CO., LIMITED All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.